Clover CDR4450 Bedienerhandbuch PDF herunterladen (Seite 88)

Contents

6-8-8. Firmware Update

To find out if there is an update in firmware, please contact Clover Electronics

If there is any firmware update available, download the file to a USB memory.

The file name should be FW4VN.FW2

If the file name is altered in any way, or if the file is saved in a folder, the

DVR will not be able to find this file, and therefore not be able to update the

firmware.

The steps to updating the firmware is as shown

Step 1. To update the firmware of the DVR Unit, first check with Clover

Electronics on whether or not there is an update.

Step 2. Format and connect a USB memory to your computer and download

the firmware file onto the USB. For information on how to format

your USB memory, refer to Chapter 5-8. Copying to USB. Make

sure the firmware file is saved directly to the USB memory and not in

a folder.

Step 3. Connect the USB memory to the DVR Unit and proceed as shown.

 To update the firmware, press the Menu button to enter the main menu. From

the main menu, use the Up / Down button to select the System option and

press Enter to enter the System menu.

 From the System menu, select the Firmware Update option using the Up /

Down button and press enter to proceed.

Ú The current version of the Firmware will show at the bottom of the main

- 87 -

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 104 105

Keine Kommentare

Clover CDR4450 Bedienerhandbuch Seite 88