Clover C1704DVR Spezifikationen PDF herunterladen (Seite 42)

- 41 -

4.4 Connection and Setting

 In order to use remote viewing by DvrAdmin software, you will need to setup the following four

operations. If you use Static IP, you only need to set the configuration of the software. Please follow

the instruction.

► IP SHARING ROUTER SETUP

► DDNS SIGN UP (See 3.5.6. DDNS for more information)

► System’s DDNS SETTING (See 3.5.6. DDNS for more information)

► DvrAdmin (Remote Viewing Program)

4.4.1 IP Sharing Router Setup

► User must have the IP Sharing Router and user will need to forward the PORT number in Virtual

Server Setup in order to retrieve the images from the system. The system uses one port from

port # 2500~2509, and port # 80 to transmit and receive the images, so you will need to set Port

Forwarding to use remote viewing in IP Sharing Router application.

(1) Most of IP Sharing Router has its own Port and IP setting web page or program. You will

need to set Port Forwarding in Virtual Server Setup in this setting page. The captured web page

below is the setup page for ‘ANYGATE’ IP Sharing Router. Click on Port Forwarding Setup to

continue. Please contact IP Sharing Router’s company for more information or see the Router

manual before continuing Router setup.

[Fig. 4-1 Virtual Server Setup]

(2) User needs to add new service in Port Forwarding. Put ‘80’ in Port number section and enter

the IP address that you made a note in the system’s DDNS setup. Please do the same operation

with port number that you set in the system’s Port setup. The capture image below shows you

how to add the port forwarding. In this case, port no. 2505 was selected in IP SETUP of system.

Virtual Server Setup

Port Forwarding

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Keine Kommentare

Clover C1704DVR Spezifikationen Seite 42